Hyaluronic Acid in Skincare: A Brand's Guide to Ingredient Forms, Sampling and Evidence
Quick answer
Hyaluronic acid (HA) is a large, water-binding sugar polymer that occurs naturally in skin. In skincare it is used as a humectant and skin-conditioning ingredient, and it is usually declared on labels as Sodium Hyaluronate, its sodium salt. In a cosmetic, HA holds water at the skin surface, gives a slippery or cushioned feel, and in larger grades thickens the water phase.
For a brand developing an HA product, the useful questions are practical ones:
- Which material, exactly? Ask for the INCI name, the supplier’s grade code and its molecular-weight range, not just “multi-weight HA”.
- Which format? A leave-on serum and a sheet mask use HA for different jobs and are judged on different things in a sample review.
- Which claims? Hydration and smoother-looking skin are typical cosmetic claims. Each one needs evidence that fits the finished product. Research on an ingredient, or on someone else’s formula, does not transfer automatically.
This guide covers those questions for brand buyers and development teams. Injectable hyaluronic-acid fillers are a different, separately regulated category and are out of scope.
What hyaluronic acid is, in brief
Hyaluronan is a long-chain polysaccharide that the skin also makes for itself. The Cosmetic Ingredient Review (CIR) Expert Panel’s 2009 safety assessment of hyaluronic acid and its salts notes that cosmetic HA was obtained primarily from bacterial fermentation and rooster combs. That assessment described hyaluronic acid, sodium hyaluronate and potassium hyaluronate as skin-conditioning agents used in cosmetics at concentrations up to 2% at the time, and concluded they are safe for use in cosmetics as described in the report. The panel’s conclusion applies to the uses and concentrations it reviewed, not to any formula a brand might design.
“Hyaluronic acid” and “sodium hyaluronate” are often used interchangeably in marketing. On an ingredient list they are different INCI names. For the brand, the naming point matters most at artwork stage: the INCI name on the label must match the material actually used, while the front-of-pack copy can say “hyaluronic acid” only if that is accurate and permitted in your markets.
Our skincare ingredients guide explains how humectants work and why molecular weight changes how HA behaves on skin. This article does not repeat that explanation. It focuses on what to request, how to sample and how to match evidence to claims.
Section summary: HA is a humectant polymer, usually supplied as sodium hyaluronate. The ingredient name tells you the chemical family, not the grade, the level or what the finished product does.
Ingredient forms: names you will see on a specification
Suppliers sell many HA materials. The names below are the ones a brand is most likely to see on a formula sheet. The right column is the point that matters for a buyer: what the name alone leaves open.
Swipe horizontally to view all columns →
| Name on the formula sheet | What it usually refers to | What the name does not tell you | What to ask the supplier |
|---|---|---|---|
| Hyaluronic Acid | The acid form of hyaluronan | Molecular-weight range, source, purity | INCI name as declared, grade code, molecular-weight range and how it was measured |
| Sodium Hyaluronate | The sodium salt; the most common cosmetic form | Whether it is a high, medium or low molecular-weight grade | Same as above, plus the solution viscosity the supplier specifies for that grade |
| Potassium Hyaluronate | The potassium salt, covered in the same CIR assessment | Grade and molecular weight | Same as above; confirm availability and market acceptance |
| Hydrolyzed hyaluronic acid or hydrolyzed sodium hyaluronate | HA broken into shorter chains | How short, and how broad the distribution is | Molecular-weight range, method, and the exact INCI name to declare |
| Supplier trade names (“multi-weight HA”, “5D HA” and similar) | A blend of grades or a modified HA | Which INCI names and ratios are inside | Full INCI composition of the blend, any carrier or preservative, and the percentage of each component |
A trade name is not an INCI name. Ask for the composition of any blend so the ingredient list can be written correctly, including any preservative or carrier it brings.
Also, “low molecular weight” and “high molecular weight” are supplier descriptions, not fixed standards. One supplier’s “low” can be another’s “medium”. Ask for numbers: the molecular-weight range in kilodaltons (kDa) and the method used to measure it. If you plan to say anything about molecular weight on the label, those numbers become part of your evidence file.
Section summary: Ask for INCI names, grade codes and measured molecular-weight ranges. Trade names and “low/high” labels are starting points for questions, not specifications.
What molecular weight changes, and what it does not decide
The ingredients guide linked above covers the molecular-weight research. In short, larger grades thicken water more and tend to leave a film, and smaller grades thicken less. A 2025 review by Zanchetta and colleagues summarises studies in which HA below 100 kDa penetrated skin. Those results depend on the material, dose, vehicle and test method, and the authors declare employment with a cosmetic ingredient company. The figure is a research finding, not a penetration threshold any finished product meets.
For a buyer, that means three things:
- Raw-material file. Any molecular-weight statement on the brief or label needs the supplier’s measured range and method behind it.
- Sample differences. Different grades make different formulas. Record the grade on each sample code and compare feel, flow and layering.
- Finished-product evidence. A product does not inherit published results because its label says “low molecular weight” or “multi-weight”. Claimed results need evidence on your product.
Claim wording needs the same care. FDA’s page on wrinkle treatments and other anti-aging products says a product intended to make lines and wrinkles less noticeable simply by moisturizing is a cosmetic, while one intended to affect the structure or function of the skin, for example to remove wrinkles or increase collagen production, is a drug or sometimes a medical device. “Helps lines look less noticeable by moisturizing” and “fills wrinkles from within” therefore fall on different sides of that line. Review each proposed line for its meaning, evidence and destination market.
Section summary: Document and sample molecular weight; do not treat it as a guaranteed result. Check each penetration or wrinkle phrase individually.
What to request in the raw-material file
Before a manufacturer starts sampling, agree which documents will sit behind each HA material in the formula. The list below is what a brand can reasonably ask a manufacturer to obtain and keep for the project. Exact document names and contents vary by supplier.
- Specification sheet for the grade: appearance, assay or content, molecular-weight range or intrinsic viscosity, solution pH, loss on drying, protein or other impurity limits if specified, and microbiological limits.
- Certificate of analysis (COA) for the batch actually used in your samples, with the batch or lot number. A COA describes one batch against the specification. It is not a stability study or a safety assessment.
- Origin statement: fermentation-derived or animal-derived. This matters for vegan or animal-free positioning and for some market and retailer questionnaires.
- Composition statement for blends: every INCI name and its percentage, including carriers and preservatives.
- Safety data sheet and any supplier regulatory summary for cosmetic use.
Ask the manufacturer to record the HA grade code and lot number against every sample formula code. A change of supplier or grade after approval is a formula change and needs the same review.
Section summary: For each HA material, keep a specification, batch COA, origin and composition statement, all linked to the sample formula code. These documents describe the raw material, not your product.
Format decisions: serum or sheet mask
An HA serum and an HA sheet mask illustrate how the same ingredient family leads to different briefs. The actual formula, HA grades, levels, testing scope and supply terms must be confirmed for each project.
Swipe horizontally to view all columns →
| Question | Leave-on serum | Sheet mask |
|---|---|---|
| How the user meets the product | A few drops, spread and left on, often under other products | A saturated sheet worn for a set time, then removed; leftover serum is patted in |
| What HA does in the formula | Humectant, slip, film and part of the viscosity | Humectant and body of the serum the sheet carries |
| What the user notices first | Slip on application, tack after drying, pilling under sunscreen or makeup | Wetness and drip, how the sheet clings, tack after removal |
| Viscosity target | Set against the dispenser: a dropper needs a different flow than a pump | Set against sheet saturation and leakage in the sachet |
| Packaging questions | Dropper bulb, pipette and wiper, or pump gasket in contact with the formula | Sachet seal, serum volume per sheet, sheet material and folding |
| Typical cosmetic claim territory | Hydration, a smoother or plumper look, comfortable feel | Immediate hydration, a fresher or more supple look after use |
| What a quick sample review cannot show | Shelf-life behaviour, preservative performance, any measured hydration result | Seal integrity over storage and transport, preservative performance, measured hydration |
Our sheet mask manufacturing guide covers sheet and sachet decisions.
Section summary: Decide the format before the grade. The serum is judged on slip, tack and layering; the mask on saturation, cling and sachet performance.
Sampling an HA product: observable targets
Feedback such as “too sticky” or “feels nice” gives a formulator little to work with. Turn the brief into targets the team can check on every sample version.
For a serum, consider:
- Flow from the chosen pack. Does one press or dropper fill deliver the intended amount without stringing or dripping?
- Tack. How does the skin feel one minute and five minutes after application? Is there a film that some users might describe as tight?
- Layering. Apply your intended moisturizer or sunscreen over it after a set wait. Does it pill or ball?
- Appearance. Clear or slightly hazy, colourless or tinted, any bubbles that do not clear.
For a sheet mask, consider:
- Saturation and drip. Is the sheet evenly wet when unfolded? How much serum drips on unfolding?
- Cling and fit. Does the sheet stay in place for the intended wear time?
- After-feel. How does the skin feel after removal and after patting in the leftover serum?
- Sachet handling. Does the tear notch work, and is there leakage at the seal after handling?
Record each observation against the sample’s formula code, date and storage conditions, and describe before you judge: “light tack at five minutes, no pilling under sunscreen A”.
Team impressions tell you about sensory fit, not stability, preservation, tolerance or claim support.
Section summary: Write observable targets for flow, spread, tack, layering and appearance (serum) or saturation, drip, cling and sachet handling (mask), and record every sample against its formula code.
Stability and packaging: what to plan for
A hydrating formula may be simpler than an active serum, but its shelf-life behaviour still has to be shown. Viscosity, appearance, odour and pH can change over time and under heat. Packaging components can also interact with the formula. With a dropper, the bulb, pipette and wiper all touch the product. With a sheet mask, the sachet laminate and seal do the work of keeping water in and light out, and leakage or drying-out in transport is a real failure mode to check.
Ask the manufacturer to propose:
- Which parameters will be tracked in stability work (for example appearance, odour, pH and viscosity), at what conditions and for how long, on the final formula in the final pack.
- What packaging compatibility checks apply to your chosen dropper, pump or sachet.
- How preservative performance will be confirmed. Water-rich HA products need effective preservation like any other water-based cosmetic.
- Which checks are part of routine batch release and which are separate studies quoted on their own.
Our guides to cosmetic stability testing and packaging compatibility for pumps, droppers and airless packs explain what these studies cover.
Section summary: Track viscosity, appearance, odour and pH in the final pack, check component compatibility, and confirm preservation. Release checks and formal stability studies are different things.
Three levels of evidence: raw material, target formula, finished product
Most confusion about HA claims comes from mixing up three kinds of evidence. Raw-material evidence describes the ingredient: specifications, COAs, published reviews and supplier studies on their own test formulas. Target-formula evidence comes from a formula like yours and can support a decision to proceed, but not automatically a claim. Finished-product evidence covers the product you will sell, in its final pack: stability, preservation, safety assessment and claim studies.
Swipe horizontally to view all columns →
| Claim idea | Typical evidence a brand should plan | Comment |
|---|---|---|
| “Contains hyaluronic acid” | Formula and raw-material documents showing the declared material is present | Factual ingredient statement; the INCI name must match |
| “Hydrating” or “helps skin feel hydrated” | Finished-product evidence fitted to the exact wording, for example a hydration measurement or a structured consumer perception study | Choose the study type with a qualified provider before artwork |
| “Multi-weight hyaluronic acid” | Raw-material documents showing more than one defined grade in the formula | Supports the composition statement only, not a performance result |
| “Smoother-looking skin” or “plumper-looking skin” | Finished-product evidence for that appearance claim | Appearance wording; check how each market treats “plump” |
| “Lines look less noticeable” (by moisturizing) | Finished-product evidence for that appearance claim | FDA treats moisturizing-based appearance claims as cosmetic; check other markets |
| “Removes wrinkles” or “boosts collagen” | Exclude for a cosmetic unless reviewed | FDA gives these as examples of drug or device claims; other HA studies do not transfer |
| “Penetrates deep into the skin” or “fills wrinkles like fillers” | Review line by line; usually exclude | Depends on what the copy says the product does; filler comparisons invoke a medical device category |
| “Suitable for sensitive skin” | A study designed for that population and use pattern | Not a property of HA in general |
Our guides to cosmetic efficacy testing and claims compliance in the US, EU and China explain how claim evidence is assembled. The decision for each claim is the same: match the exact words to evidence on the exact product, or drop the claim.
Section summary: Raw-material and target-formula data help choose an ingredient. Claims on your label need evidence on your finished product, in your pack, for your wording.
Keeping injectable fillers out of scope
Hyaluronic acid is also the basis of many injectable dermal fillers. FDA describes dermal fillers as medical device implants approved for specific uses, and states that it has not approved any dermal fillers for over-the-counter use. That is a different regulatory category from a cosmetic serum or mask.
For a skincare brand, do not use filler results, injection imagery or “needle-free filler” language to sell a topical product, and keep “filler” and “injectable” off the claim list.
Section summary: Filler data and filler language do not belong in topical HA marketing.
A brand brief for an HA product
A brief a manufacturer can quote against covers these items. Mark unknown fields “open” rather than guessing.
- Product definition. Format (serum, sheet mask or both), intended users, use occasion (morning, evening, before makeup, weekly mask) and destination markets in launch order.
- Positioning. Entry hydration, a premium multi-weight story, or part of a barrier or soothing range. Name the other products in your range it must sit beside.
- Sensory targets. For a serum: flow, slip, tack at one and five minutes, layering under named products. For a mask: saturation, drip, cling, after-feel.
- Ingredient direction. HA forms you want or want to avoid, whether you want a molecular-weight statement on pack, fragrance-free or a defined scent, any supporting humectants or extracts, and any ingredients you exclude.
- Packaging. Dropper, pump or sachet; size; sheet material; whether you supply components.
- Claims. Intended claims word for word, possible claims if evidence allows, and excluded claims (for example “fills wrinkles”, “penetrates deep”, “injection-like results”).
- Documents. The raw-material file listed above, a formula code for each sample, and the finished-product specification for the approved formula.
- Testing scope. Which studies you expect to commission and which you need quoted: stability, packaging compatibility, preservative performance, safety assessment and claim studies.
- Commercial items. Expected quantity per SKU, launch window and target price range.
Section summary: A good brief fixes the format, the sensory targets, the HA direction, the pack and the claim list, and names the documents and studies you expect.
Sample comparison table
The table below is an illustrative buyer example. It shows how a brand might record a first round with two serum versions and one mask. It is not real test data, not a client project and not a description of any GZ Cosmetics Lab formula.
Swipe horizontally to view all columns →
| Check | Serum S-01 (illustrative) | Serum S-02 (illustrative) | Mask M-01 (illustrative) | What this review cannot decide |
|---|---|---|---|---|
| HA materials recorded | Two grades listed with codes, no molecular-weight figures | Three grades listed with ranges in kDa | Two grades listed with codes | Whether any grade changes measured hydration in this product |
| Flow and dosing | Dropper fills evenly; slight stringing | Thinner; drips from pipette | Sheet evenly wet; some drip on unfolding | Viscosity behaviour over shelf life |
| Tack | Noticeable at one minute, gone at five | Light at one minute | Light tack after patting in | Tolerance in target users |
| Layering | Pills under sunscreen A | No pilling under sunscreen A | Not applicable | How other sunscreens behave |
| Appearance | Clear | Clear, a few fine bubbles | Clear serum in sachet | Colour or clarity change over time |
| Packaging | Bulb feels firm; no residue on wiper | Some product above the wiper | Seal intact after handling | Pack compatibility over the stability period |
| Next request | Reduce stringing and pilling; add kDa ranges | Increase body slightly; send revised code S-03 | Reduce drip; confirm fill per sheet | Formal stability, preservative and claim work |
When a revised sample arrives, add a new column with the new code rather than overwriting the old one.
Section summary: Compare coded samples on the same checks, record what you saw, and keep a column for what only formal work can answer.
From brief to quote request
When the brief is ready, send it with these questions:
- Which HA materials, by INCI name and grade code, would you propose for this format, and what molecular-weight range and documents can you provide for each?
- Which of our pack options has this type of formula been used in, and what compatibility work would you recommend for our chosen components?
- What is included in routine release testing, and what stability, preservative, safety and claim work would be scoped and quoted separately?
- What MOQ, sample timing and production timing apply once the formula and pack are settled?
If you are planning a serum or sheet mask, send your format, sensory targets, packaging direction and destination markets through the quote request form. Ask us to confirm the HA grades, levels, testing scope, supply terms and claims for your project.
Key takeaways
- Hyaluronic acid is a humectant polymer, usually declared as Sodium Hyaluronate. The name tells you the family, not the grade.
- Ask for INCI names, grade codes, measured molecular-weight ranges and batch COAs, and link them to every sample formula code.
- Choose the format first. Serums are judged on flow, tack and layering; sheet masks on saturation, cling and sachet performance.
- Molecular weight changes behaviour, but it does not prove what your finished product does. Review each penetration or wrinkle phrase against its meaning, evidence and market.
- Raw-material data, target-formula data and finished-product evidence answer different questions. Claims need the last kind.
- Keep injectable filler results and language out of topical HA marketing.
Frequently Asked Questions
Is hyaluronic acid the same as sodium hyaluronate? They are the same polymer family with different INCI names. Sodium hyaluronate is the sodium salt and the form most often used in skincare. Declare whichever material is actually in the formula.
How much hyaluronic acid should a serum contain? There is no single right level. It depends on the grade, the texture you want, the pack and the claim. Ask the manufacturer for a proposed level and the reason for it, and judge it on samples against your sensory targets.
Should we ask for “low molecular weight” hyaluronic acid? Ask for numbers instead: the molecular-weight range in kDa and the measuring method. If you want to make a claim that depends on molecular weight, plan finished-product evidence for that claim and check the wording in each market.
Can we say our serum “plumps” or “reduces wrinkles”? It depends on the exact wording and what it implies. In the US, making lines look less noticeable by moisturizing is a cosmetic claim, while removing wrinkles is given by FDA as a drug or device example. Either way you need finished-product evidence for the exact wording and a check in each market. Studies on other HA formulas do not transfer.
Why does our HA serum pill under sunscreen? Pilling can involve the formula, the amount applied, drying time or an interaction with the sunscreen or other layers. Repeat the observation with recorded amounts, timing and named products; then ask the formulator to investigate and send a new coded sample for comparison.
Do we need stability testing for a simple hydrating product? Yes. Viscosity, appearance, odour, pH and preservation can change in the final pack over time. Ask which checks are routine release and which are separate stability studies.
Ready to Start Your Project?
Tell us your product requirements. Within 24 hours, our technical team will reply with a quotation or the questions needed to prepare one.