Premium (hero product)
Skin Repair Freeze-Dried Serum Set
A two-part freeze-dried repair set: a lyophilised active cake and a separate solvent ampoule, mixed at the moment of use. The point of the format is stability — with no water in the vial, the peptide and the humectants are not sitting in solution degrading on the shelf, so the actives are at full strength the first time the serum touches skin. Levels below are stated as the concentration in the reconstituted serum, not in the dry powder, so they read on the same basis as an ordinary serum. Manufactured under ISO 22716 and GMPC. Each level is our standard ODM baseline and can be adjusted within the range shown to suit your positioning, destination-market rules, and cost structure — we confirm ingredient compliance against your target market before sampling.
Product Overview
| MOQ | 3,000–5,000 sets / SKU |
| Lead Time | 50–70 days |
| Sizes | per box 3–5 bottles, per vial 3–5ml |
| Packaging | Glass lyophilized vial + ampoule solvent; gift box packaging |
| Mini Pack | No - Already in individual tubes |
| Suitable For | Post-procedure, Compromised barrier, Mid-to-high-end users |
Response within 24 hours · Free samples available
Key Active Ingredients
How the Active Ingredients Work
This set is built around a single small-molecule peptide plus supporting humectants, kept dry until use. Each figure below is the level in the mixed serum and sits at our standard ODM baseline, adjustable to your positioning and price point.
Oligopeptide-1baseline 10 ppm (0.001%) · range 5–10 ppm
A small signal peptide used at the low parts-per-million levels typical of the ingredient — our baseline is 10 ppm, adjustable from 5 to 10 ppm. There is no regulatory ceiling on it in the markets we ship to. One naming point matters for your artwork and INCI list: Oligopeptide-1 is not human oligopeptide-1 (EGF); they are different ingredients and we do not substitute one for the other. Because the vial is anhydrous, the peptide is not held in water where it could hydrolyse over shelf life; it only meets the solvent at the moment you reconstitute.
Hyaluronic Acidsupporting humectant
A blend of molecular weights carried in the solvent side of the set, working as a supporting humectant rather than an efficacy active. We do not claim it hydrates at different skin depths — high molecular weight hyaluronic acid does not meaningfully penetrate. Its job here is to give the freshly mixed serum a light, comfortable slip so it sits well on skin straight after a procedure. We fix the grade mix and level per project, since the right figure shifts with your chosen powder-to-solvent ratio.
Centella Asiaticasupport level, form set per project
Included at a supporting soothing level rather than as a headline active. Centella is supplied in several forms — solvent extract, standardised glycosides, or TECA — and they are not interchangeable on a percentage basis, so the form and level are fixed per project before we quote a number. For a freeze-dried set the choice also has to suit the drying step, which we confirm at sampling.
Panthenolsupporting soother
Provitamin B5, included on the solvent side as a well-tolerated skin conditioner that supports comfort on freshly treated skin. We keep it as a supporting ingredient and set the exact level per project rather than positioning it as a headline active. Holding it in the solvent rather than the powder keeps the dry cake to the peptide and its stabilisers, which is simpler to validate on stability. It dissolves readily, so it does not slow down the mixing step for the end user.
Formulation & Customization Options
| Active load on reconstitution | Total actives come to 1–5% of the mixed serum once the powder dissolves; the powder-to-solvent ratio is set with you at sampling |
| Service model | ODM (adjust our existing repair base) or full OEM custom development |
| Format | Lyophilised active cake plus separate solvent ampoule; 3–5 vials per box |
| Adjustable actives | Peptide level within 5–10 ppm; humectant and soothing system tuned to your positioning |
| Reconstitution | Powder and solvent mixed at point of use; we set fill volumes so the reconstituted serum lands on your target levels |
| Packaging | Glass lyophilised vial plus ampoule, gift-box presentation; custom print and secondary packaging |
| Certifications | ISO 22716, GMPC; SGS testing supported on request |
Who This Product Is Built For
Post-procedure and barrier-support lines
Brands positioning a serum for use after facials or in-clinic treatments, where a fresh-mixed, full-strength repair step is the story.
Premium and gifting ranges
The two-part vial format and gift-box presentation support a higher price point than a standard dropper serum.
Brands wanting the freeze-dried format explained honestly
We state levels on a reconstituted basis so your claims hold up, rather than quoting dry-powder figures that overstate strength.
Brands building a freeze-dried range
This repair set is the entry point; the Firming Anti-Aging Freeze-Dried Serum Set and the Multi-Effect Treatment Freeze-Dried Set carry the same format into other positioning.
Frequently Asked Questions
Why freeze-dried instead of a normal serum?
The active is kept as a dry cake with no water in the vial, so a peptide that would slowly hydrolyse in a water-based serum stays intact until you mix it. You reconstitute it just before use and get full-strength actives on first application. The trade-off is a higher unit cost and a two-part pack, which is why this sits as a premium SKU.
What do the concentrations refer to — the powder or the finished serum?
The finished, reconstituted serum. We state levels on that basis so they read on the same scale as an ordinary serum and your claims are accurate. Dry-powder percentages would look far higher and would not reflect what reaches skin.
What is the MOQ and lead time?
MOQ is 3,000–5,000 sets per SKU and lead time is 50–70 days after sample approval. Freeze-drying runs on dedicated equipment with its own scheduling, so the lead time is longer than a standard serum — worth planning into your launch calendar.
Can I adjust the formula?
Yes, this is offered as ODM. The peptide level is adjustable within 5–10 ppm and the supporting humectant and soothing system can be tuned to your positioning. Full custom OEM development is also available.
Is it certified for export?
Manufacturing is ISO 22716 and GMPC compliant, with SGS testing on request. We confirm ingredient compliance against your destination market before sampling.
Customization
OEM/ODM supported; peptide and repair system adjustable by efficacy needs
Target Markets
Certifications
ISO 22716 & GMPC certified; SGS testing supported upon request
Related Skincare Products
Clinical Grade Repair Freeze-Dried Set
per box 3–5 bottles, per vial 3–5ml · 50–70 days
Brightening Anti-Spot Freeze-Dried Serum Set
per box 3–5 bottles, per vial 3–5ml · 50–70 days
Night Bounce Repair Essence Lotion
30ml / 50ml · 45–55 days
Barrier-First Moisturizing Essence Lotion
30ml / 50ml · 45–55 days
Need a Custom Skin Repair Freeze-Dried Serum Set Formula?
Tell us your requirements — target actives, texture, packaging, quantity, and target market. We will respond with a custom formulation proposal within 48 hours.
Response within 24 hours · WhatsApp available · Factory visits welcome